INKJET Proxy - TWILL FOIL - GREY CORE - 1st Edition - 348gsm/385mic

348SF: ~348gsm, ~385micron, grey core.

There is a minor imperfection with the surge PET film where there is a slight hairline fracture on the sheets. Printing over it obfuscates it by around 80-90%. 99%+ of people haven't even noticed it.

Here is the response from the manufacturer regarding the hairline fracture: "Holographic film with patterns will have this. For those without patterns, such as regular ones, we can cover the middle seam with the same pattern module, but for those with patterns, using the module will cause misalignment of the pattern."

The A4 sheets are short grain (print 9 cards landscape).

Front is full gloss foil, back is matte white. Both sides are printable. An Epson 8500+ is recommended, but it had been reported to work on much lower end models.

Works with dye and pigments inks. 

Let the prints cure overnight in a dry environment to remove tackiness, then sleeve while wearing gloves. Humid environments and hand moisture will increase tackiness - does not effect the print.

Rear or flat feed only: It will jam if it is fed through a paper feeder cassette or duplexer. Minimize bending.

Color - Use a photo paper semigloss setting for less saturated colors and a full gloss photo paper setting for more saturated colors.

Only use sleeved, as it lacks a varnish layer. If for some reason you want to play with them unsleeved, use "Fanning Powder" to add glide to them.

[BARTER]
Do you make cool original proxy/game stuff (original art/mechanics)? I'll trade you paper for it. Email me.